Setting White Balance - Kodak EasyShare DX6340 User Manual

Setting White Balance

Whites can look white in daylight, but different under other lighting conditions.
Use White Balance to correct the color shifts that result from shooting pictures
under different light sources.
NOTE: White Balance is available in Landscape, Close-up, and PAS modes.
1
In any Still mode, press the Menu button.
2 Press
Chapter 2
to highlight White Balance
3 Press
press the OK button.
4
Press the Menu button to exit the menu.
This setting remains until you change the
Mode dial or turn off the camera; or, if it
was set while in PAS mode, until you use
Reset
setting.
, then press the OK button.
to highlight an option, then
Auto (default)— automatically corrects
white balance. Ideal for general picture
taking.
Daylight—for pictures in natural
lighting.
Tungsten—corrects the orange cast of
household incandescent (tungsten) or
halogen light bulbs. Ideal for indoor
pictures without flash.
Fluorescent—corrects the green cast of
fluorescent lighting. Ideal for indoor
pictures under fluorescent lighting
without flash.
(page 36) to return to the default
31