Mmc/Sd Cards And Internal Memory - Kodak EasyShare DX6340 User Manual

Problem
Cannot transfer
pictures.
(The Add New
Hardware
Wizard cannot
locate drivers.)

MMC/SD Cards and Internal Memory

Problem
The camera
does not
recognize
MMC/SD card.
Camera freezes
up when a card
is inserted or
removed.
Chapter 10
Cause
Software is not installed. Disconnect USB cable. (If using
Software is installed
incorrectly.
Cause
The card may not be
MMC/SD certified.
The card may be
corrupt.
Card is not properly
inserted in camera.
Camera detects an
error when the card
was inserted or
removed.
Solution
camera dock, disconnect cable and
remove camera from dock). Install
EasyShare software
Disconnect the USB cable. Close all
open applications. Uninstall, then
re-install the software
To uninstall, go to Start/Settings/
Control Panel/Add/Remove
Programs.
Solution
Purchase a certified MMC/SD card.
Reformat the card
Caution: Formatting erases all
pictures and videos, including
protected files.
Insert a card into the slot, then push
to seat (page 9).
Turn the camera off, then back on.
Make sure the camera is off when
inserting or removing a card.
(page 69).
(page 69).
(page 66).
89