Kodak 8660 - COLOR CONNECTOR GUIDE Interface Manual page 31

Setting Custom Rendering
Do the following steps to set custom rendering.
NOTE: If you wish to set custom rendering for more than one puzzle
piece in the template, you need to repeat this procedure for each
piece.
1. Pull down the Rendering
drop-down list box, and
select "Custom".
2. Build the connector file you need for your job.
Managing Multiple Sources."
3. Double-click on the source or simulation puzzle piece in the color
connector socket in the template for which you wish to set custom
rendering.
CONTENTS INDEX SEARCH
Refer to "Color
HELP
Operator's Guide
Printing Guide
Color Management
Calibration
Network
Interface Guide
Color Management
Options
Using Color
Connector
Menus and Dialog
Boxes