HOMCOM VC-6003 Manual page 9

Care and maintenance
Cleaning the cyclone system and HEPA filter components
1. Press the button in the direction shown, turn the dust cup assembly to unlock, and
then take out the dust cup filter assembly.
2. Rinse the cyclone system components until clean. After cleaning, let them dry for at
least 24 hours. When cleaning the HEPA filter, rinse it with clean water and rotate it
360° to ensure all dust is removed from the crevices. Gently tap it against the sink to
dislodge any remaining dust. Air the HEPA filter assembly for 24 hours until it is
completely dry, then reinstall it into the filter system.
3. Allow to dry and then reinstall the selected air system assembly.
Note: Do not place cyclone or HEPA components in a dishwasher or washing machine
for cleaning. Avoid drying them in a dryer, oven, microwave or near an open flame.
9