HOMCOM VC-6003 Manual page 10

Care and maintenance
Cleaning floor brush
Note: Before removing the floor brush, ensure it is detached from the host machine to
prevent accidentally turning on the vacuum cleaner and avoiding injury. Do not use water
to clean the floor brush as it contains electrical components. Be cautious of sharp objects
when removing debris entangled around the brush head.
Cleaning roller brush
1. Press the release button on the brush head in the direction of the arrow. Remove one
side of the brush head cover, then slide it off the notch to access and clean the brush
head, as shown in the diagram.
2. Use scissors to lift and cut off any hair and debris that are stuck to the brush head.
3. Once finished cleaning, reassemble the components.
10