Global Industrial 270315 User Manual

User's manual
Customer Service
US: 1-800-645-2986
Surface Mount Water Bottle Refilling Station
System 761251 certified
IAPMO R & T against to NSF/ANSI
42, 53 & 372
WARNING
• For indoor commercial use only.
• All installation work must be performed by authorized
service personnel.
• Two or more people are recommended to lift and
install the unit.
• To avoid the risk of property damage and/or personal
injury, mount the unit to a flat finished wall surface
adequate support.
• Check local codes for plumbing requirements prior
to installation.
• Prior to initial installation, install a shut-off valve (not
included) from the water supply.
• Thoroughly flush all water lines and fittings of all
foreign matter before connecting to the cooler.
Failure to do so will void warranty.
• Check for any leaks before initial operation.
• DO NOT attempt to repair or replace any part of your
appliance unless it is specifically recommended in
this manual. All other services should be referred to a
qualified technician.
Manual del usuario
Servicio de atenci n al Cliente
US: 1-800-645-2986
by
TM
ó
Read this manual thoroughly prior to Read this manual thoroughly prior to
installation, operation or maintenance. installation, operation or maintenance.
Keep these instructions in a safe location Keep these instructions in a safe location
Service at 1-800-645-2982.
for future reference. For questions, visit for future reference. For questions, visit
globalindustrial.com or contact Customer globalindustrial.com or contact Customer
Service at 1-800-645-2982. Service at 1-800-645-2982.
• For use with clean, clear potable drinking water only.
• Shut-off water supply during installation to reduce risk
of water damage.
• Ensure proper ventilation by allowing appropriate
clearance of housing louvers to the wall on each side of
the cooler, as specified in rough-in guide.
• DO NOT allow children to play with the appliance.
• Interior of unit may contain sharp edges. Wear gloves
when handling or servicing unit.
• Failure to follow installation instructions will
void warranty.
Note: These fixtures are intended for indoor
commercial use only. Do not expose to freezing
temperatures. The grounding of electrical equipment to
water lines is a common procedure. This grounding
may be in the building or occur away from the
building. This grounding can cause electric
feedback into the water cooler creating an
electrolysis which creates a metallic taste or causes
the water metal content to increase. Connect to water
supply using non-conductive materials.
1
Manuel de l'utilisateur
Service la client le
à
Canada: 888-645-2986
Model 270315
(761251 + 761215PF)
TM
è
052120