Table of Contents
Advertisement
Quick Links
TOLERANCE NOTES
FABRICATED TOLERANCES
≥ 2 ft (610 mm) ± 0.250 in (6.4 mm)
< 2ft (610 mm) ± 0.125 in (3.2 mm)
MACHINED TOLERANCES
± 0.050 DECIMAL DIM (1 PLACE)
± 0.010 DECIMAL DIM (2 PLACES)
± 0.005 DECIMAL DIM (3 PLACES)
KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE!
Read this manual before using this product. Failure to follow the instructions and safety precautions in this
PART NUMBER
2653-271-11
2653-271-05
For a list of relevant patents and trademarks, please see
RELATED DOCUMENT – MUST COMPLY WITH SCHEDULE DOCUMENT(S):
FOR A LIST OF RELEVANT PATENTS
AND TRADEMARKS PLEASE SEE
CHENTRONICS.COM/LEGAL-NOTICES
ISO 9001 CERTIFIED
DRAWN BY:
ON:
AR
2022-NOV-01
LAST REV BY:
ON:
INSTALLATION & OPERATION MANUAL
DSF-2010-SB
manual can result in serious injury or death or damage to equipment.
Applicable Scanner Part Numbers
TYPE (SB, MB)
AREA (NON-HAZ, HAZ)
SB
SB
Contact Technical Support +1.866.821.5504 with any questions.
INSTALLATION & OPERATION MANUAL
DCO No
.
15135
DWG. No.
TEMP RATING
NON-HAZ
-30°C to 70°C
HAZ
-30°C to 70°C
http://www.chentronics.com/legal-notices
MNL-ISCAN2SB
THIS
DRAWING
OWNED
BY
CHENTRONICS.
CONDITIONALLY LOANED AND IS TO BE RETURNED UPON
REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED
NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR
TO FURNISH INFORMATION FROM IT TO OTHERS NOR TO
MAKE ANY USE OF IT THAT IS OR MAY BE INJURIOUS TO
CHENTRONICS. FOR MORE INFORMATION PLEASE CONTACT
CHENTRONICS
AT +1.607.334.5531.
KEY FEATURE
Auto-Gain
Auto-Gain
MNL-ISCANSB
PAGE 1 OF 23
J
REV.
IT
IS
INPUT
PINS
14
10
Advertisement
Table of Contents
Related Manuals for iScan DSF-2010-SB
Summary of Contents for iScan DSF-2010-SB
- Page 1 CHENTRONICS AT +1.607.334.5531. ± 0.005 DECIMAL DIM (3 PLACES) DSF-2010-SB KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE! Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual can result in serious injury or death or damage to equipment.
-
Page 2: Table Of Contents
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 3: Important Safety Information
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 4: Customer Support
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 5: Electrical Area Classification And Safety Markings
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 6: Non-Hazardous Area
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 7: General
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 8: Product Features
4.3 Product Features 4.3.1 Programmability Using iScan Software , the SB models have limited programmability (intended for single burner applications). MB models have a high degree of programmability, as outlined in the table below: For instructions on how to program the scanner, please reference the iScan Software manual. -
Page 9: Technical Specifications
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 10: Specification Table
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 11: Default Configuration (Settings)
For accurate readings, 4-20 mA output(s) should be calibrated using a milli-ammeter between the scanner’s 4-20 mA output and the monitoring hardware. Refer to the 4-20 ma Settings section MNL-iScan Software for details on how to execute the calibration procedure. -
Page 12: Wiring Instructions
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 13: Non-Hazardous Area Model (14 Wire) Installations
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... - Page 14 TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <...
-
Page 15: Hazardous Area Model (10 Wire) Installations
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... - Page 16 TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <...
-
Page 17: Communication Wiring Detail
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 18: Daisy Chain" Configuration
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 19: Split Or "Y" Configuration
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 20: Non-Hazardous Area Model And Hazardous Area Model Mounting
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 21: Non-Hazardous Area Model (Pn 2653-271-12) General Arrangement
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 22: Sighting The Scanner
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <... -
Page 23: Sighting Non-Hazardous Area Models
TOLERANCE NOTES THIS DRAWING OWNED CHENTRONICS. INSTALLATION & OPERATION MANUAL FABRICATED TOLERANCES CONDITIONALLY LOANED AND IS TO BE RETURNED UPON ≥ 2 ft (610 mm) ± 0.250 in (6.4 mm) REQUEST. THE BORROWER BY RECEIVING IT HAS AGREED NOT TO REPRODUCE NOR COPY IT IN WHOLE OR IN PART NOR <...
Need help?
Do you have a question about the DSF-2010-SB and is the answer not in the manual?
Questions and answers