Storage Configuration - ASROCK M3N78D - V1.0 User Manual

ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows

3.4.4 Storage Configuration

3.4.4 3.4.4 3.4.4 3.4.4 Storage Configuration Storage Configuration Storage Configuration Storage Configuration
BIOS SETUP UTILITY
Advanced
Storage Configuration
Onboard IDE Controller [Enabled]
[Enabled]
Onboard SATA Controller
[AHCI]
SATA Operation Mode
[Hard Disk]
IDE1 Master
[Not Detected]
IDE1 Slave
[Not Detected]
SATAII_1
[Not Detected]
SATAII_2
SATAII_3 [Not Detected]
[Not Detected]
SATAII_4
[Not Detected]
eSATA5
[Not Detected]
eSATA6
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Onboard IDE Controller
Use this item to enable or disable the "Onboard IDE Controller" feature.
Onboard SATA Controller
Use this item to enable or disable the "Onboard SATA Controller" feature.
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this
option is [AHCI]. If you want to operate RAID function on SATA / SATAII
HDDs, please select [RAID]. Configuration options: [IDE], [RAID] and [AHCI].
* If you select [RAID] mode, SATA / SATAII HDDs can not be accessed until you finish
configuring RAID functions in NVIDIA BIOS / Windows RAID Utility.
* If you install OS on SATA / SATAII HDDs, please do not change the setting of this
item after OS installation.
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the "IDE1 Master" as the example in the following instruction, which can
be applied to the configurations of "IDE1 Slave" as well.
Vista certification.
® TM
Options
IDE
RAID
AHCI
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
4 7 4 7 4 7 4 7 4 7