Table of Contents
Advertisement
.. \ I386 (For Windows
®
Vista
.. \ AMD64 (For Windows
After that, please insert Windows
drive again to continue the installation.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows
2.14
2.14
Installing Windows
Installing Windows
2.14
2.14 Installing Windows
2.14
Installing Windows
Installing Windows
Vista
Vista
Vista
Vista
Vista
64-bit / XP / XP 64-bit With RAID Functions
64-bit / XP / XP 64-bit With RAID Functions
64-bit / XP / XP 64-bit With RAID Functions
64-bit / XP / XP 64-bit With RAID Functions
64-bit / XP / XP 64-bit With RAID Functions
TM
TM
TM
TM
TM
If you want to install Windows
your SATA / SATAII HDDs with RAID functions, please follow below procedures
according to the OS you install.
2.14.1 Installing Windows
2.14.1 Installing Windows
2.14.1 Installing Windows
2.14.1 Installing Windows
2.14.1 Installing Windows
Functions
Functions
Functions
Functions
Functions
If you want to install Windows
functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII driver diskette.
Please make a SATA / SATAII driver diskette by following section 2.13.1 step 2 on
page 29.
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
You can start to install Windows
®
of Windows
setup, press F6 to install a third-party RAID driver. When prompted,
insert the SATA / SATAII driver diskette containing the NVIDIA
reading the floppy disk, the drivers will be presented. Select the drivers to install. The
drivers are as below:
A. NVIDIA RAID Driver (required)
B. NVIDIA nForce Storage Controller (required)
TM
OS)
®
TM
Vista
64-bit OS)
®
TM
TM
Vista
/ Vista
64-bit optical disk into the optical
Advanced screen
®
Vista
TM
/ Vista
TM
64-bit OS on your system.
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
® ® ® ® ®
®
7 / 7 64-bit / Vista
TM
/ Vista
XP / XP 64-bit With RAID
XP / XP 64-bit With RAID
XP / XP 64-bit With RAID
® ® ® ® ®
XP / XP 64-bit With RAID
XP / XP 64-bit With RAID
®
XP / XP 64-bit on your SATA / SATAII HDDs with RAID
Advanced screen
®
XP / XP 64-bit OS on your system.
®
XP / XP 64-bit OS on your system. At the beginning
3 1
3 1
3 1
3 1
3 1
Storage Configuration.
/ / / / /
TM
TM
TM
TM
TM
TM
64-bit / XP / XP 64-bit on
Storage Configuration.
®
RAID driver. After
Hide quick links:
Advertisement
Table of Contents
