ASROCK K8UPGRADE-VM800 User Manual page 17

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Header
(9-pin USB67)
(see p.8 No. 21)
Shared USB 2.0 Header
(9-pin USB45)
(see p.8 No. 33)
Infrared Module Header
(5-pin IR1)
(see p.8 No. 9)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.8 No. 32)
(AUX1: see p.8 No. 31)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.8 No. 29)
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
ASRock I/O Plus
USB_PWR
P-6
dates 6 default USB 2.0 ports. If
P+6
GND
DUMMY
those USB 2.0 ports on the I/O
panel are not sufficient, this
1
GND
USB 2.0 header is available to
P+7
P-7
USB_PWR
support 2 additional USB 2.0
ports.
This USB45 header is shared
1
USB_PWR USB_PWR
with the USB 2.0 ports 4,5 on
P-4 P-5
P+4 P+5
ASRock I/O Plus
GND
GND
DUMMY
the front panel USB ports by
attaching the front panel USB
cable to this header (USB45), the
USB ports 4,5 on ASRock I/O
Plus
IRTX
This header supports an
+5V
DUMMY
optional wireless transmitting
1
and receiving infrared module.
GND
IRRX
These connectors allow you
CD-R
GND
CD1
to receive stereo audio input
GND
CD-L
from sound sources such as
AUX-R
a CD-ROM, DVD-ROM, TV
GND
AUX1
GND
AUX-L
tuner card, or MPEG card.
This is an interface for front
GND
+5VA
BACKOUT-R
panel audio cable that allows
BACKOUT-L
convenient connection and
1
control of audio devices.
AUD-OUT-L
GND
AUD-OUT-R
MIC-POWER
MIC
1 7 1 7 1 7 1 7 1 7
TM
accommo-
TM
. When using
TM
will not be able to function.