Table of Contents
Advertisement
BIOS:
OS:
CAUTION!
1.
While CPU overheat is detected, the system will automatically shutdown.
Please check if the CPU fan on the motherboard functions properly before
you resume the system. To improve heat dissipation, remember to spray
thermal grease between the CPU and the heatsink when you install the PC
system.
2.
Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
3.
Power Management for USB 2.0 works fine under Microsoft
SP1 / 2000 SP4. It may not work properly under Microsoft
ME. Please refer to Microsoft
http://www.microsoft.com/whdc/hwdev/bus/USB/USB2support.mspx
4.
Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
5.
Because the current 64 bit Operating System and drivers are not formally
released yet, the 64 bit drivers included in the ASRock support CD-ROM
under "XP64DRV_beta" folder are in their beta versions ( i.e. test versions)
and for test purpose only. When the official 64 bit drivers are available,
ASRock Inc. will put those official 64 bit drivers onto our support web site
http://www.asrock.com/ without notice.
AMI legal BIOS;
Supports "Plug and Play";
ACPI 1.1 compliance wake up events;
Supports "Plug and Play";
Supports jumperfree;
SMBIOS 2.3.1 support;
CPU frequency stepless control
(only for advanced users' reference, see CAUTION 4)
®
Microsoft
Windows
(see CAUTION 5)
®
official document at
®
98 SE / ME / 2000 / XP compliant
®
®
Windows
XP
®
®
Windows
98/
Advertisement
Table of Contents
