Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
connect to the SATA HDD
(Optional)
USB 2.0 Header
(9-pin USB67)
(see p.8, No. 19)
Shared USB 2.0 Header
(9-pin USB45H)
(see p.8, No. 29)
Infrared Module Header
(5-pin IR1)
(see p.8, No. 18)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.8, No. 28)
(AUX1: see p.8, No. 27)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.8, No. 25)
power connector
connect to the
power supply
USB_PWR
P-6
P+6
GND
1
GND
P+7
P-7
USB_PWR
1
USB_PWR
P-4
P+4
GND
IRTX
+5V
DUMMY
1
GND
IRRX
CD-L
GND
GND
CD-R
AUX-L
GND
GND
AUX-R
GND
+5VA
BACKOUT-R
1
GND
AUD-OUT-R
MIC-POWER
MIC
Please connect the black end of
SATA power cable to the power
connector on the drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
ASRock I/O Plus
dates 6 default USB 2.0 ports. If
DUMMY
those USB 2.0 ports on the I/O
panel are not sufficient, this
USB 2.0 header is available to
support 2 additional USB 2.0
ports.
This USB45 connector is shared
USB_PWR
P-5
with the USB 2.0 ports 4,5 on
P+5
GND
ASRock I/O Plus
DUMMY
the front panel USB ports by
attaching the front panel USB
cable to this connector (USB45),
the USB ports 4,5 on ASRock I/O
TM
Plus
will not be able to function.
This header supports an optional
wireless transmitting and
receiving infrared module.
These connectors allow you
CD1
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
AUX1
tuner card, or MPEG card.
This is an interface for the front
panel audio cable that allows
BACKOUT-L
convenient connection and
control of audio devices.
AUD-OUT-L
TM
accommo-
TM
. When using
Advertisement
Table of Contents
