Add Video Source - Adcom RD-300 Quick Start Manual

3) Login to the management web page
If you connect NET 1 to your computer, enter 192.168.1.168 or http://192.168.1.168
in the browser. In the pop-up login dialog box, it will require the username and
password.
admin admin
Default username: , default password: .
4) Device IP address configuration
After you login to your device, you can configure your network as DHCP or
Manually Set, which can be used for streaming and device management.

2. Add video source

Decoding devices support a variety of decoding protocols such as RTSP, RTMP,
RTMPS, SRT, TS over UDP, HTTP, NDI | HX (2.0), etc. First get the correct video
source URL address (you can test the video source for availability with the VLC
player) and then add it to the decoding device for decoding.
1) Add an RTSP video source:
In the media tab, click "Add", configure the parameters in the pop-up dialog box,
and click "OK" to add the video source to the video list.