Advertisement
The decoder supports online firmware upgrading. Through the "System Settings" -
"Firmware Upgrade" function of the WEB management interface, you can upload
the firmware upgrade files provided by the manufacturer for the firmware online
upgrade.
After the firmware upgrade file uploaded successfully, the decoder will
automatically restart the device for the upgrade, which will take approximately 1 to
3 minutes (depending on the memory of the firmware, the upgrade time varies),
please be patient.
After the upgrade is complete, check the current software version information and
the upgraded firmware consistently through "System Settings" - "Firmware
Upgrade" in the WEB interface to confirm that the upgrade was successful.
Note: Configurations may change greatly after updating for certain firmware
versions, and some functions may be used abnormally. It is recommended to
restore the factory settings after the firmware upgrade.
Advertisement
Need help?
Do you have a question about the RD-300 and is the answer not in the manual?
Questions and answers