Polygroup FunSicle Fun Fold Pool User Manual page 7

Maintaining Your Pool
• Clean your pool with only mild soap and lukewarm water.
• To prevent mildew, ensure the pool is completely dry before packing up.
• Store your pool in a dry area where temperatures do not go below 32°F or above 125°F.
• Punctures or holes can be repaired using a small patch kit.
Repairing Your Pool
1. Thoroughly clean the area surrounding the leak to remove any dirt or grime.
2. Cut a piece of repair patch (included) with a margin of 0.8 inches (2 cm) larger than the damaged
area, rounding the corners with scissors.
3. Place the patch over the center of the leak, press down firmly, and squeeze out all air bubbles to the
edges. You may want to put a weight on top to keep it in place.
4. Wait one hour before filling the pool with water.
NOTE:
If the patch does not hold, you can use the patch with silicone or polyurethane-based glue
designed for repairing camping mats, tents or shoes. Consult your local household/camping
supply stores, and follow the instructions of the glue you have chosen.
7