Polygroup FunSicle Fun Fold Pool User Manual page 6

Emptying Your Pool
1. Empty your pool of water by pulling the cap off the drainage plug.
2. Allow the water to drain onto the ground.
3. If there is still water in your pool, pull it upwards by one side and tip the water out until empty.
4. Close the plug cap once the pool is completely empty.
Folding Up Your Pool
Safety Note: Ensure your pool is empty and completely dry before packing up.
Steps:
1. Ensure the pool is standing upright.
2. Flatten the entire pool on the ground with one side facing down.
3. Push the panels from each end to form a fan.
4. Close the panels together horizontally.
5. Fold the bottom liner into a triangle to lie on top of the pool.
6. Place the folded vertically into its packaging.
1.
4.
2.
5. 6.
6
3.