Table of Contents
Advertisement
Chipset Configuration:
Advanced
Chipset Configuration
AGP Aperture Size
Onboard VGA Share Memory
USB Controller
USB Device Legacy Support
F1:Help
Esc:Previous Menu
AGP Aperture Size: It refers to a section of the PCI memory address range
used for graphics memory. We recommend that you leave this field at the
default value unless your AGP card requires other sizes.
Onboard VGA Share Memory: This allows you to select the size of share
memory for onboard VGA. Onboard VGA will get better resolution if larger
size of share memory is selected. Please do not select [None] if AGP or PCI
graphics card is not inserted.
USB Controller: Use this to enable or disable the use of USB controller.
USB Device Legacy Support: Use this to enable or disable support to emulate
legacy I/O devices such as mouse, keyboard,... etc.
Resource Configuration:
Advanced
Resource Configuration
PCI Latency Timer (PCI Clocks)
Primary Graphics Adapter
F1:Help
Esc:Previous Menu
PCI Latency Timer (PCI Clocks): The default is 32. We recommend you to
keep the default value unless your PCI expansion cards' specifications
require other settings.
Primary Graphics Adapter: Select PCI, OnBoard VGA, or Add-on AGP as the
primary graphics adapter.
AMIBIOS SETUP UTILITY - VERSION 3.31a
32MB
4MB
Disabled
Disabled
:Select Item
+/-:Change Values
Enter:Select
AMIBIOS SETUP UTILITY - VERSION 3.31a
32
AGP
:Select Item
+/-:Change Values
Enter:Select
[
Setup Help
<Enter> to select the
size of mapped memory
for graphics data.
F9:Setup Defaults
F10:Save & Exit
Sub-Menu
[
Setup Help
F9:Setup Defaults
F10:Save & Exit
Sub-Menu
]
]
Advertisement
Table of Contents
