I. INTENDED USE
The device is an infrared thermometer intended to measure the forehead temperature of
infants and adults without contacting the human body. It can be used by consumers in a
household environment and doctors in the clinic as a reference.
II.
WARNINGS AND PRECAUTIONS
Only use this thermometer once you have read and understood the instruction for use.
Only use this thermometer for the specific purpose described in the instruction manual.
Any misuse will void the warranty.
This thermometer may be used for professional purposes or personal home use.
Using this thermometer is no substitute for consulting a doctor. Do not self-diagnose or
self-medicate based on the measurements without consulting your doctor. In particular,
do not start taking any new medication or change the type and/ or dosage of any existing
medication without prior approval.
In particular, do not take any new medication or change the type and/or dosage of any
existing medication without consulting your doctor and obtaining your doctor's approval.
This thermometer must be operated by adults and be placed out of the reach of infants.
Ensure that children do not use this device unsupervised; some parts are small enough
to be a choking hazard or be swallowed.
If this thermometer is stored in a cooler or warmer location than where it is being used,
please put it in the operation place for at least 30 minutes before taking the
measurement.
After physical activity, a bath, or spending time outdoors, wait approximately 30 minutes
before you measure the temperature on your forehead.
To ensure an accurate measurement, you should only use this thermometer indoors
when the ambient temperature range is between 10℃ (50℉) and 40℃ (104℉) .
Before and after each use, the thermometer should be cleaned according to the
requirement of this manual to avoid possible bacterial infections.
Do not expose this thermometer to electric shocks.
Do not expose this thermometer to extreme temperature conditions of greater than 55℃
(131℉) or less than -20℃ (-4℉) .
Do not use this thermometer in relative humidity higher than 85%.
Do not put this product in a place with direct sunlight, high temperature, high humidity,
excessive dust, or the place where it may contact corrosive gas or liquid. Do not use this
product in the above environment.
Do not drop this thermometer.
DO NOT TOUCH THE GLASS OF THE INFRARED SENSOR WITH YOUR FINGERS
AS IT IS EXTREMELY FRAGILE AND COULD CAUSE INJURY.
Do not use this thermometer if it is damaged.
Do not open up this thermometer. It contains small parts which might be swallowed by
children.
Never immerse the device in water or other cleaning liquids, and do not let any liquid
enters the interior of this product.
2
Need help?
Do you have a question about the JXB-195 and is the answer not in the manual?
Questions and answers
how to change to Fahrenheit scale forjxb-195
To change the Berrcom JXB-195 thermometer to the Fahrenheit scale, press the “On/Scan” button to select Fahrenheit (℉), then press the “MODE” button to confirm.
This answer is automatically generated