GETTING STARTED Note: The slit lamp oculars and lamp are not shown in the above diagram. The hole for the slit lamp adapter may be covered by a removable cap.
Swivel the lamp and oculars to the side of the slit lamp to make room for the adapter. Attach the adapter to the slit lamp. Power on the VistaView and begin imaging. Use the joystick to align the VistaView optics to the retina.
INTENDED USE The VistaView Slit Lamp Adapter is an accessory meant to be used with a VistaView to allow for a more stable setup for fundus imaging. The adapter is only compatible with VVISTAVIEW2. It is not intended to be used with the slit lamp oculars, lamp, or other components of the slit lamp.
Page 5
Check Out Our Other V O L K P R O D U C T S Scan the QR Code below to be redirected to our website. volk.com Volk Optical Inc. Rudolf Riester GmbH EC REP 7893 Enterprise Drive Bruckstraße 31...
Need help?
Do you have a question about the VistaView and is the answer not in the manual?
Questions and answers