Presetting Stations - Aiwa CT-X409 Operating Instructions Manual

PRESETTING STATIONS
12
1
2
Press BAND to select a desired band
from among FM1, FM2, FM3 and AM.
L
J
Press and hold A.ME for more than 2
seconds to activate the automatic
presetting function.
The six strongest available stations will be
stored in memory on the preset station buttons
1 to 6 in order of their signal strength.
Use this function to automatically preset up to 6
stations each for FMI, FM2, FM3 and AM (up to
a total of 24 stations).
. When auto memory is completed, the station
stored in 1CH is tuned in.
To stop auto memory, press A.ME again.
To check the preset stations (preset scan)
If you wish to check the preset stations, press
A.ME forlessthan 2seconds. The preset stations
stored in memory will be tuned
in for 5
seconds
each in order.
To stop this function, press A.ME again or press
any of the preset station buttons 1 to 6.
You can manually preset stations that have not
been selected by auto memory.
2
1
2
3
3
1
Press BAND to select the band from
among FM1, FM2, FM3 and AM.
Tune in the station that you wish to
preset with TUNE 7 or TUNE A.
Press one of the preset station buttons .
1 to
6 for approximately 2 seconds.
The number of the pressed preset station
button appears next to the frequency
indication.
Preset number
Repeatthese procedurestopreset upto6 stations
each for FM1, FM2, FM3 and AM.
If you try to preset a station on a preset station
button on which another station of the same
band has already been preset, the previously
preset station will be erased.
7
ENGLISH