ASROCK ALIVEXFIRE-ESATA2 User Manual page 22

Step 8. Install the required drivers to your system. Please visit the websites below
for installing the drivers that ATI
A. ATI recommends Windows
TM
installed (If you have Windows
in your system, there is no need to download it again):
http://www.microsoft.com/windowsxp/sp2/default.mspx
B. You must have Microsoft .NET Framework installed prior to
downloading and installing the CATALYST Control Center:
http://www.microsoft.com/downloads/details.aspx?
FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en
Step 9. Restart your computer.
Step 10. Install the VGA card drivers to your system, and restart your computer.
Then you will find "ATI Catalyst Control Center" on your desktop.
Step 11. Double-click "ATI Catalyst Control Center". Click "View", and select "Ad-
vanced View". Click "CrossFire
CrossFire " to "Yes".
TM
View
TM
CrossFire
recommends:
TM
XP Service Pack 2 or higher to be
®
XP Service Pack 2 or higher installed
®
You will find "ATI Catalyst
Control Center" on your
desktop.
", and then set the option "Enable
TM
2 2 2 2 2 2 2 2 2 2
Enable CrossFire TM