Mini Wallbox Plus Instructions For Use Manual page 5

Never clean the MINI Wallbox Plus using a jet of water (hosepipe, pressure washer, etc.)!
■
Ensure that the MINI Wallbox Plus is not damaged by incorrect handling (housing cover,
■
internal parts, etc.).
If it is raining or snowing and the MINI Wallbox Plus is installed outdoors, do not open the
■
terminal panel cover.
Do not break the plastic housing by use of excessive force.
■
Do not use countersunk screws to secure the device.
■
Do not tighten the securing screws with excessive torque, follow the instruction on the
■
torque mentioned in the manual.
The installation area must be completely flat (max. 1 mm difference between the support
■
and securing points). Do not bend the housing.
For maximum security, the energy meter should be installed/sealed in a secure
■
environment to prevent any unauthorized access and all connection cables and sealing
must be checked regularly. If any sealing is broken the security and safety can no longer be
ensured and MINI and its affiliates are not liable for damages and/or losses related to such
disturbances, security breaches, unauthorized access, interface, intrusion, leakage and/or
theft of data or information.
Information for trained personnel who may open the device: Danger of damage. Electronic
components may be destroyed if touched. Before handling modules, perform an electrical discharge
process by touching a metallic grounded object. A failure to follow the safety information may result
in a danger of death, injury and damage to the device. The device manufacturer cannot accept any
liability for claims resulting from this.
1.2 Intended use
The MINI Wallbox Plus is a charging station for indoor and outdoor use for charging electric or plug-
in hybrid vehicles. Do not connect any other devices such as electric tools. The MINI Wallbox Plus
is designed for installation on a wall or a column. Comply with the relevant national regulations for
installing and connecting the MINI Wallbox Plus.
The intended use of the device in every case includes compliance with the ambient conditions for
which this device was developed.
The MINI Wallbox Plus was developed, manufactured, tested and documented on the basis of the
relevant safety standards. If you comply with the instructions and safety information described for its
intended use, the product normally will not pose any danger in terms of property damage or to the
health of people.
5