Homebase ROWLY 6 SEATER DINING SET TABLE Instruction Manual page 4

ASSEMBLY INSTRUCTIONS
Step 1 :
Place the table top onto a non-abrasive surface, such as a carpet, with its underside facing upwards. Insert the
legs (2) and the supports (3) into the plastic holders attached on the underside of the table top (1).
Fasten the seat post to the seat assembly by using screws (D).
Step 2 :
Fasten the centre connector (4) to the middle of the legs by using bolts (A), washers (B) and plastic nuts (C).
Keep the bolts loose. Fasten the centre connector (4) to the supports by using bolts (A), washers (B) and plastic
nuts (C). Make sure that all of the bolts have been tightened completely.
Step 3 :
Turn the table to its upright position.
D
2
4
B
A
C
2
1
3
4
3
ASSEMBLY COMPLETE