Advertisement
- 1 EXPLODED VIEW
- 2 CLEARANCES AND SPECIFICATIONS
- 3 ACCESSORY BOX
- 4 CABLE CONNECTIONS
- 5 BUTTONS AND I/O
- 6 PANEL REMOVAL
- 7 MOTHERBOARD INSTALLATION
- 8 EXPANSION CARD INSTALLATION
- 9 SSD DRIVE INSTALLATION
- 10 PREPARING THE BACKPLATE
- 11 INSTALLING THE BACKPLATE
- 12 INSTALLING THE WATER BLOCK - INTEL SOCKET
- 13 PREPARING THE RETENTION BRACKET
- 14 CHANGING THE RETENTION BRACKET
- 15 INSTALLING THE WATER BLOCK - AMD SOCKET
- 16 INSTALLING THE FAN CONTROLLER USB
- 17 CONNECTING THE PUMP TACH
- 18 TUBE ORIENTATION
- 19 POWER SUPPLY SPECIFICATION
-
20
INSTALLATION
- 20.1 STEP 1: Connect the 20+4-pin power to the motherboard
- 20.2 STEP 2: Connect the 4+4-pin CPU power
- 20.3 STEP 3: Connect the PCI-e power to your graphics card as required
- 20.4 STEP 4: Connect the SATA and peripheral power as needed
- 20.5 STEP 5: Connect the AC power cord to the wall and turn on the power switch
- 21 SUPPORT AND SERVICE
- 22 Documents / Resources
EXPLODED VIEW
- Top Cover
- Right Side Filter
- Left Side Filter
- Front Tempered Glass Panel
- Rear Panel
- Chassis
- Liquid Cooler Bracket
- 140mm AIO Liquid Cooler
- SFX 750W PSU
- Toolless SSD Tray
- PCIe Riser Cable
- Styrofoam Component Holder
- Fan Controller
- 92mm Fan
- AC Power Cord Extender
- 20+4-Pin ATX Power Cable
- 4+4-Pin CPU Power Cable
- 6+2-Pin PCIe Power Cable
- SATA Power Cable
CLEARANCES AND SPECIFICATIONS
DIMENSION
GPU CLEARANCE
| Max GPU Clearance | 324mm |
| Max GPU Thickness | 58mm |
| Motherboard Support | Mini-ITX (Increased Wi-Fi compatibility with a wired antenna) |
| Integrated Power Supply | SFX 750W Gold Fully Modular Power Supply |
| Integrated CPU Liquid Cooler | 140mm AIO Liquid Cooler with 140 AER P Static PWM Fan (FDB) |
| Integrated PCIe Extender Cable | PCIe Gen 4 Compatible ×16 Extender Cable |
| 2 Ch PWM Fan Controller | |
| Air Intake | Integrated AIO 140mm Liquid Cooler for CPU |
| Air Outlet | 92mm PWM for GPU |
| 2.5'' SSD Support | 2 |
| Expansion Slots | 2 |
ACCESSORY BOX
FOR CASE
- 6-32 x 5mm Screw
- Cable Tie
- AC Power Cord
FOR COOLING
- Intel Socket 1200/115X Backplate
- Intel Socket 1200/115X Standoff Screw
- Intel Socket 1700 Backplate
- Intel Socket 1700 Standoff Screw
- Thumbnut with Spring
- AMD Retention Bracket
- Hook Screw for AMD Retention
CABLE CONNECTIONS
BUTTONS AND I/O
- Headset Jack
- USB 3.2 Gen 2 Type-C
- USB 3.2 Gen 1x1 Type-A
- HDD LED
- Power LED
- Power switch
PANEL REMOVAL
MOTHERBOARD INSTALLATION
- Remove screws pointed by arrows and lift to open
![MOTHERBOARD INSTALLATION - Step 1]( "NZXT - H1 - MOTHERBOARD INSTALLATION - Step 1")
- Replace the Dummyboard with Motherboard from the direction shown here
![MOTHERBOARD INSTALLATION - Step 2]( "NZXT - H1 - MOTHERBOARD INSTALLATION - Step 2")
![MOTHERBOARD INSTALLATION - Step 3]( "NZXT - H1 - MOTHERBOARD INSTALLATION - Step 3")
![MOTHERBOARD INSTALLATION - Step 4]( "NZXT - H1 - MOTHERBOARD INSTALLATION - Step 4")
EXPANSION CARD INSTALLATION
SSD DRIVE INSTALLATION
PREPARING THE BACKPLATE
INTEL SOCKET 1700 or 1200/115X
INSTALLING THE BACKPLATE
INTEL SOCKET 1700 or 1200/115X
INSTALLING THE WATER BLOCK - INTEL SOCKET
INTEL SOCKET 1700 or 1200/115X
| Socket | |
| 75mm x 75mm | Intel 1200/115X |
| 78mm x 78mm | Intel 1700 |
PREPARING THE RETENTION BRACKET
AMD SOCKET
AMD Socket: AM5, AM4
CHANGING THE RETENTION BRACKET
AMD SOCKET
INSTALLING THE WATER BLOCK - AMD SOCKET
AMD SOCKET
INSTALLING THE FAN CONTROLLER USB
CONNECTING THE PUMP TACH
TUBE ORIENTATION
Position tubes outwards before closing!
Check for cable and tube clearance when closing
Do not fold or Crimp tubes
POWER SUPPLY SPECIFICATION
SFX 750W Gold Fully Modular Power Supply
Fan: 92mm FDB Silent Fan
80 Plus Gold Certified
AC Input Full Range
Operating Temperature: 0-40°C
MTBF @ 25°C, excl. fan 100,00 hours
Protection: OVP, UVP, OPP, SCP, OCP, OTP
| C750 Gold mini | |||||
| PRODUCT TYPE | Switching Power Supply | ||||
| RATING | 100V-240V 12A-6A 50Hz-60Hz | ||||
| DC OUTPUT | +3.3V | +5V | +12V | +5Vsb | -12V |
| MAX LOAD | 20A | 20A | 62.5A | 2.5A | 0.3A |
| MAX OUTPUT POWER | 120W | 750W | 16.1W | ||
| TOTAL POWER | 750 W | ||||
INSTALLATION
STEP 1: Connect the 20+4-pin power to the motherboard
STEP 2: Connect the 4+4-pin CPU power
STEP 3: Connect the PCI-e power to your graphics card as required
STEP 4: Connect the SATA and peripheral power as needed
STEP 5: Connect the AC power cord to the wall and turn on the power switch
SUPPORT AND SERVICE
If you have any questions or problems with the NZXT product you purchased, please don't hesitate to contact us using our support system. support.nzxt.com
Please include a detailed explanation of your problem and your proof of purchase. For comments and suggestions, you can e-mail our design team, designer@nzxt.com. Lastly we would like to thank you for your support by purchasing this product.
For more information about NZXT, please visit us online. NZXT Website: nzxt.com
+1 (800) 228-9395
service@nzxt.com
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the H1 and is the answer not in the manual?
Questions and answers