Installing The Dms Camera - Queclink CV200 User Manual

CV200 Dash Camera User Manual

3.4. Installing the DMS camera

Follow the steps to install the DMS-feature camera properly.
1. Select a location on the dashboard to place the camera. For best accuracy of DMS, install the
DMS camera in the recommended area.
* Do not install the product in a location where it obstructs the driver's field of vision.
* Be careful not to interfere with the product when operating the vehicle handle.
2. Place the camera far way from driver face 50-90cm and mount it under dashboard.
3. Plug the connector of DMS-feature camera into the function cables, the camera will be
powered on.
Step #1 DMS feature Activation
Normally, it requires to activate the DMS module online when you would like to use DMS related
features. The steps are as following:
1. Query the activation state if needed, you can input "AT+DSS" command over local serial port.
Or send RTO command 21 to request online.
2. You need to purchase a "User_Key" that is a MUST to the activation command from sales
managers
3. Input the requested User Key into RTO command 20. The camera will send the request to the
hosted server and receive the permission to activate immediately
4. Query the activation states again as the methods above.
15