Gallagher Fence Control Installation And Operating Instructions Manual page 3

Commissioning
1. The cover of the Fence Control housing can be opened upon delivery. Open it carefully.
2. Insert the SIM card into the SIM card holder as described in the instructions on the antenna.
Slide back the tab of the SIM card holder and open it.
SIM card must not have an active PIN
SIM cards usually come with an active PIN. You must remove the PIN on your SIM card before
you can use the SIM card for Fence Control. More on this on page 8.
Credit and activation
Make sure your mobile phone provider's SIM card is activated. In the case of a prepaid card
tariff, it must have sufficient call credit.
3. The internal battery of the Fence control is disconnected on delivery. Connect the battery.
The Fence Control should now start. You can recognise this by the flashing pattern of the 3
LEDs.
4. Carefully close the cover of the Fence control housing, making sure the seal is in place, and
screw down the housing with the six screws provided to ensure it is watertight.
5. Now connect the power supply (battery or mains adapter). The Fence Control indicates the
current status via an LED pattern. You will find a description of the LED patterns on page 4.
Wait until the "Ready to use" LED pattern appears before continuing.
Any SMS messages you send to the Fence Control before the "Ready to use" status is active
will be deleted.
6. Send an SMS with the content "abo 1234" to
the mobile phone number of the inserted
SIM card. If you receive a reply, this number
is now registered in Fence Control and fence
voltage monitoring is activated. Additional
configuration options can be found on page
9. Congratulations - commissioning of the
Fence Control is now complete!
Selecting the preferred language
The Fence Control will automatically change the language to the country of origin of your SIM card.
If the language does not automatically switch to the correct one automatically, or you want to select
another language, you can always set it manually using one of the following SMS commands:
•
language nl / de / fr / en (choose the desired language)
2 SIM card
5 Power supply
3 Internal battery
3