Table of Contents
Advertisement
2.7 Onboard Headers and Connectors
2.7 Onboard Headers and Connectors
2.7 Onboard Headers and Connectors
2.7 Onboard Headers and Connectors
2.7 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATAII Connectors
(SATAII_1: see p.2, No. 15)
(SATAII_2: see p.2, No. 16)
(SATAII_3: see p.2, No. 14)
(SATAII_4: see p.2, No. 10)
Serial ATA (SATA)
Data Cable
(Optional)
USB 2.0 Headers
(9-pin USB6_7)
(see p.2 No. 24)
(9-pin USB8_9)
(see p.2 No. 22)
Infrared Module Header
(5-pin IR1)
(see p.2 No. 12)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.2 No. 19)
1 4
1 4
1 4
1 4
1 4
These Serial ATAII (SATAII)
SATAII_2
SATAII_4
SATAII_1
SATAII_3
This header supports an
optional wireless transmitting
and receiving infrared module.
ASRock A330ION Motherboard
connectors support SATAII
or SATA hard disk for internal
storage devices. The current
SATAII interface allows up to
3.0 Gb/s data transfer rate.
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on the motherboard.
Besides four default USB 2.0
ports on the I/O panel, there are
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
This is an interface for front
panel audio cable that allows
convenient connection and
control of audio devices.
Advertisement
Table of Contents
