ASROCK 939A785GMH128 User Manual page 42

DRAM Voltage
Use this to select DRAM voltage. Configuration options: [Auto], [2.60V] to
[2.95V]. The default value is [Auto].
Memory Timing
BIOS SETUP UTILITY
OC Tweaker
Memory Timing
[Auto]
CAS Latency
TRAS [Auto]
TRP [Auto]
TRCD [Auto]
[Auto]
TRRD
TRC [Auto]
MA Timing [Auto]
Burst Length [4 Beats]
Bank Interleaving [Auto]
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
CAS Latency
Use this item to adjust the means of memory accessing. Configuration
options: [Auto], [2T], [2.5T] and [3T]. The default value is [Auto].
TRAS
Use this to adjust TRAS values. Configuration options: [Auto], [5T] to [15T].
The default value is [Auto].
TRP
Use this to adjust TRP values. Configuration options: [Auto], [2T] to [6T].
The default value is [Auto].
TRCD
Use this to adjust TRCD values. Configuration options: [Auto], [2T] to [6T].
The default value is [Auto].
TRRD
Use this to adjust TRRD values. Configuration options: [Auto], [2T] to [4T].
The default value is [Auto].
TRC
Use this to adjust TRC values. Configuration options: [Auto], [7T] to [22T].
The default value is [Auto].
MA Timing
Use this to adjust values for MA timing. Configuration options: [Auto], [2T],
[1T]. The default value is [Auto].
Burst Length
Burst length can be set to 8, 4 or 2 beats. 64 Bit Dq must use the 4 beats.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
4 2 4 2 4 2 4 2 4 2