ASROCK 939A8X-M User Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. 939A8X-M
  6. User manual
ASROCK 939A8X-M User Manual

ASROCK 939A8X-M User Manual

Hide thumbs Also See for 939A8X-M:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
939A8X-M

User Manual

Version 1.1
Published July 2006
Copyright©2006 ASRock INC. All rights reserved.
1 1 1 1 1

Advertisement

Table of Contents
loading

Related Manuals for ASROCK 939A8X-M

Summary of Contents for ASROCK 939A8X-M

  • Page 1: User Manual

    939A8X-M User Manual Version 1.1 Published July 2006 Copyright©2006 ASRock INC. All rights reserved. 1 1 1 1 1...
  • Page 2 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the manual or product.

  • Page 3: Table Of Contents

    2.8 Making a SATA Driver Diskette For SATA Operation in “RAID” Mode ................ 20 2.9 SATA Operating in “non-RAID” Mode ........20 3 . 3 . 3 . 3 . 3 . BIOS S BIOS S BIOS SETUP UTILITY BIOS S...
  • Page 4 4 . 4 . 4 . 4 . 4 . Software Support Software Support Software Support Software Support ..........................................36 Software Support ........... Install Operating System ............36 Support CD Information ............. 36 4.2.1 Running Support CD ............36 4.2.2 Drivers Menu ..............

  • Page 5: Introduction Introduction

    ASRock’s commitment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by- step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.

  • Page 6: Specifications

    1.2 Specifications Specifications Specifications Specifications Specifications Platform: Micro ATX Form Factor: 9.6-in x 8.6-in, 24.4 cm x 21.8 cm CPU: 939-Pin Socket Supporting AMD Athlon 64 / 64FX Processor Supports AMD’s Cool ‘n’ Quiet Technology (see CAUTION 1) Chipset: Bridge: ULi (ALi) M1689, FSB @ 1000 MHz...
  • Page 7 To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard! It may cause permanent damage! ®...

  • Page 8: Motherboard Layout

    Floppy Connector (FLOPPY1) Secondary Serial ATA Connector (SATA2) CPU Fan Connector (CPU_FAN1) Bridge Controller 2 x 184-pin DDR DIMM Slots Game Port Header (GAME1) (Dual Channel A: DDR1, DDR2; Blue) JR1 Jumper / JL1 Jumper 2 x 184-pin DDR DIMM Slots Front Panel Audio Header (AUDIO1) (Dual Channel B: DDR3, DDR4;...

  • Page 9: Asrock 8Ch I/O

    PS/2 Mouse Port (Green) Front Speaker (Lime) If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below for connection details in accordance with the type of speaker you use. TABLE for Audio Output Connection...

  • Page 10: Installation Installation

    Installation Installation Installation 939A8X-M is a Micro ATX form factor (9.6-in x 8.6-in, 24.4 cm x 21.8 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to en- sure that the motherboard fits into it. Pre-installation Precautions...

  • Page 11: Cpu Installation

    CPU into the socket to avoid bending of the pins. Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.

  • Page 12: Installation Of Memory Modules (Dimm)

    (the same brand, speed, size and chip-type) DDR DIMM pair in the slots of the same color. In other words, you have to install identical DDR DIMM pair in Dual Channel A (DDR1 and DDR2; Blue slots; see p.8 No. 6) or identical DDR DIMM pair in Dual Channel B (DDR3 and DDR4;...
  • Page 13 DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. notch break...

  • Page 14: Expansion Slots (Pci And Agp Slots)

    PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten the inserted graphics card.

  • Page 15: Jumpers Setup

    Note: To select +5VSB, it requires 2 Amp and higher standby current provided by power supply. JR1 / JL1 Jumpers (see p.8, No. 20) Note: If JR1 and JL1 Jumpers are short, both the front panel and the rear panel audio connectors can work. Clear CMOS (CLRTC1)

  • Page 16: Onboard Headers And Connectors

    FLOPPY1 Pin1 (see p.8, No. 4) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE Connector (Blue) Secondary IDE Connector (Black) (39-pin IDE1, see p.8, No. 9) (39-pin IDE2, see p.8, No.
  • Page 17 USB_PWR ASRock 8CH I/O provides you 4 ready-to-use USB 2.0 ports on (9-pin USB67) DUMMY the rear panel. If the rear USB (see p.8, No. 14) ports are not sufficient, this USB 2.0 header is available to USB_PWR support 2 extra USB 2.0 ports.
  • Page 18 (4-pin ATX12V1) ATX 12V plug to this connector (see p.8 item 28) so that it can provides sufficient power. Failing to do so will cause the failure to power up. Game Connector Connect a Game cable to this...

  • Page 19: Serial Ata (Sata) Hard Disks Installation

    STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA connector. STEP 4: Connect the other end of the SATA data cable to the SATA hard disk. 1. If you plan to use RAID 0, RAID 1, or JBOD functions on SATA, SATA HDDs must be operated in “RAID”...

  • Page 20: Raid" Mode

    “ALi RAID BIOS Setup Utility” to set RAID 0 / RAID 1 / JBOD configuration before you install the OS. Before you start to configure the RAID function, you need to check the installation guide in the Support CD for proper configuration.

  • Page 21: Bios Setup Utility Bios Sbios Setup Utility Etup Utility

    Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise, POST will continue with its test routines. If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system chassis.

  • Page 22: Navigation Keys

    To jump to the Exit Screen or exit the current screen 3.2 Main Screen Main Screen Main Screen Main Screen Main Screen When you enter the BIOS SETUP UTILITY, the Main screen will appear and display the system overview BIOS SETUP UTILITY Advanced H/W Monitor Boot...

  • Page 23: Advanced Screen

    Advanced Screen Advanced Screen Advanced Screen Advanced Screen In this section, you may set the configurations for the following items: CPU Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration. BIOS SETUP UTILITY...

  • Page 24: Spread Spectrum

    It will display Processor Maximum Voltage for reference. Multiplier/Voltage Change This item is set to [Auto] by default. If it is set to [Manual], you may adjust the value of Processor Multiplier and Processor Voltage. However, it is recom- mended to keep the default value for system stability.
  • Page 25 [Enabled]. Burst Length Burst length can be set to 8 or 4 beats. 64 Bit Dq must use the 4 beats. CAS Latency (CL) Use this item to adjust the means of memory accessing. Configuration options: [Auto], [2.0], [3.0], and [2.5].

  • Page 26: Chipset Configuration

    AGP card’s specifications requires other sizes. AGP Data Rate For an AGP 3.0 card, you may set AGP Data Rate between [8X] or [4X], and the default value is [8X]. For an AGP 2.0 card, you may set AGP Data Rate among [4X], [2X], and [1X], and the default value is [4X].

  • Page 27: Acpi Configuration

    (C) Copyright 1985-2003, American Megatrends, Inc. Restore on AC/Power Loss If you set the item “Suspend to RAM” to [Auto], you may use this item to set the power state after an unexpected AC/Power loss. If [Power Off] is selected, the AC/power remains off when the power recovers.

  • Page 28: Ide Configuration

    Use this item to enable or disable the “OnBoard SATA Controller” feature. SATA Operation Mode Use this item to adjust SATA Operation Mode. The default value of this option is [RAID]. If you don’t want to operate RAID function on SATA HDDs, please select [non-RAID]. IDE Device Configuration You may set the IDE configuration for the device that you specify.
  • Page 29 [ARMD]: This is used for IDE ARMD (ATAPI Removable Media Device), such as MO. LBA/Large Mode Use this item to select the LBA/Large mode for a hard disk > 512 MB under DOS and Windows; for Netware and UNIX user, select [Disabled] to disable the LBA/Large mode.

  • Page 30: Pcipnp Configuration

    Setting wrong values in this section may cause the system to malfunction. PCI Latency Timer The default value is 32. It is recommended to keep the default value unless the installed PCI expansion cards’ specifications require other settings. PCI IDE BusMaster Use this item to enable or disable the PCI IDE BusMaster feature.

  • Page 31: Super Io Configuration

    Use this item to enable or disable floppy drive controller. Serial Port Address Use this item to set the address for the onboard serial port or disable it. Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4], [2E8 / IRQ3].

  • Page 32: Usb Configuration

    OnBoard Game Port Use this item to enable the Game Port or disable it. OnBoard MIDI Port Use this itme to select the address for the MIDI Port or disable it. Configura- tion options: [Disabled], [300], and [330]. 3.3.8 3.3.8 3.3.8...

  • Page 33: Hardware Health Event Monitoring Screen

    Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen In this section, it allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage.

  • Page 34: Boot Settings Configuration

    Boot From Network Use this item to enable or disable the Boot From Network feature. Boot Up Num-Lock If this item is set to [On], it will automatically activate the Numeric Lock function after boot-up. 3.6 Security Screen Security Screen...

  • Page 35: Exit Screen

    When you select this option, it will pop-out the following message, “Discard changes?” Select [OK] to discard all changes. Load Optimal Defaults When you select this option, it will pop-out the following message, “Load optimal defaults?” Select [OK] to load the default values for all the setup configurations.

  • Page 36: Install Operating System

    This motherboard supports various Microsoft Windows operating systems: 98 SE / ME / 2000 / XP. Because motherboard settings and hardware options vary, use the setup procedures in this chapter for general reference only. Refer to your OS documentation for more information.
  • Page 37 AMD’s Cool ‘n’ Quiet echnology echnology For power-saving sake, it is strongly recommended to enable AMD’s Cool ‘n’ Quiet technology under Windows system. When using this feature, please make sure to install “AMD Processor Driver” from the “Support CD” first.

Table of Contents