Table of Contents
Advertisement
Resource Configuration:
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
Resource Configuration
PCI Latency Timer (PCI Clocks)
Primary Graphics Adapter
F1:Help
:Select Item
Esc:Previous Menu
PCI Latency Timer (PCI Clocks): The default is 32. We recommend you to
keep the default value unless your PCI expansion cards' specifications
require other settings.
Primary Graphics Adapter: This allows you to select [PCI], [Internal VGA], or
[AGI] as the primary graphics adapter.
Peripheral Configuration:
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
Peripheral Configuration
OnBoard FDC
OnBoard Serial Port A
OnBoard Serial Port B
Serial/Infrared Switch
OnBoard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
OnBoard IDE
OnBoard LAN
OnBoard AC' 97 Audio
OnBoard MC' 97 Modem
F1:Help
:Select Item
Esc:Previous Menu
OnBoard FDC: Use this to enable or disable floppy drive controller.
OnBoard Serial Port A: Use this to set addresses for the onboard serial port
A or disable serial port A.Configuration options: [Auto], [Disabled], [3F8 /
IRQ4 /COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
[ Setup Help ]
<Enter> to select PCI
32
clocks. Leave on
PCI
default setting for the
best PCI performance.
F9:Setup Defaults
+/-:Change Values
F10:Save & Exit
Enter:Select
Sub-Menu
[ Setup Help ]
<Enter> to enable or
disable the floppy
Auto
drive controller.
Auto
Auto
Serial Port B
Auto
ECP+EPP
EPP 1.9
Auto
N / A
Disabled
Enabled
Auto
Auto
F9:Setup Defaults
+/-:Change Values
F10:Save & Exit
Enter:Select
Sub-Menu
2 5
2 5
2 5
2 5
2 5
Advertisement
Table of Contents
