Appendix Appendix; Advanced Bios Setup Menu - ASROCK 845GV-M User Manual

Appendix: Advanced BIOS Setup Appendix: Advanced BIOS Setup
Appendix: Advanced BIOS Setup Appendix: Advanced BIOS Setup Appendix: Advanced BIOS Setup
This section will introduce you the following BIOS Setup menus: "Advanced,"
"Security," "Power," "Boot," and "Exit."

1. Advanced BIOS Setup Menu

1. Advanced BIOS Setup Menu
1. Advanced BIOS Setup Menu 1. Advanced BIOS Setup Menu 1. Advanced BIOS Setup Menu
Main Advanced Security
Spread Spectrum
CPU Host Frequency
Actual Frequency
CPU Ratio Selection
SDRAM Frequency
Hyper Threading Technology
Flexibility Option
Chipset Configuration
Resource Configuration
Peripheral Configuration
System Hardware Monitor
F1:Help :Select Item
Esc:Exit
:Select Menu
Spread Spectrum:
This field should always be [Disabled] for better system stability.
CPU Host Frequency:
This shows current CPU host frequency of the installed motherboard.
CPU Ratio Selection:
CPU Ratio is the multiple that times the frontside bus frequency will equal
the core speed of the installed processor. Whether the option is open or locked
is determined by the installed processor.
SDRAM Frequency:
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assigns appropriate frequency automatically.
Hyper-Threading Technology:
To enable this feature, it requires a computer system with an Intel Pentium
processor that supports Hyper-Threading technology and an operating system
that includes optimization for this technology, such as Microsoft
XP. Set to [Auto] if using Microsoft
2.4.18 or higher. This option will be hidden if the current CPU does not support
Hyper-Threading technology.
Flexibility Option:
Default is [Disabled], When it's Enabled, it will allow better tolerance for
memory compatibility. There is a Hot-Key also, it will automatic to [Enabled]
when you press [Home] during the POST.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Exit
Power Boot
Disabled
Disabled
133MHz
Locked
Auto
Auto
Disabled
+/-:Change Values
Enter:Select Sub-Menu
® ®
Windows XP, or Linux kernel version
[ Setup Help ]
<Enter> to enable or
disable the feature of
spread spectrum.
F9:Setup Defaults
F10:Save & Exit
® 4
® ®
Windows
2 3 2 3 2 3
2 3 2 3