Maxcom FW63 COBALT PRO User Manual page 8

Breathing exercises: In breathing exercises, there is a choice
between 1 minute and 2 minutes. The user taps the
corresponding time for breathing training. After clicking Start,
follow the icon in the breathing exercise,zoom in and inhale,
zoom out and exhale
Stopwatch: Click the start button to calculate, click the pause
button to stop, click another button to reset. During the timing
process, click the clock icon on the right to mark the time, and
a maximum of 99 pieces of data can be marked.
Timer: The system preset the common time duration. You can
click the corresponding time duration to time quickly or click
the custom button to set the time. Click the Start button to
start the timing, click the pause button to pause the timing,
click the reset button to reset the timing to zero.
Alarm clock: After connecting the watch to the APP, you can
set a single alarm clock, a cycle alarm clock, and up to 5 alarm
clocks.
Always-on clock: After this function is enabled, the time will be
displayed on the screen-off , and the watch will increase the
power consumption. Please use it according to your own
needs.
Q&A
1. Sleep data is not accurate enough
A. Sleep monitoring simulates people's natural sleep and wake
up time, so it needs to be worn normally
B. If you wear it too late or when you fall asleep, errors may
occur
C. sleep data is not monitored during the daytime, the default
sleep monitoring period is 21:30 to 12:00 the next day
2. BT is not connected or cannot be connected
A. Restart the watch and reconnect
B. Please try to restart the mobile phone PT and connect again
7