Maxcom FW63 COBALT PRO User Manual page 3

Watch connection
QR code connection after you open the APP, if the dialog box
for obtaining permission pops up on the mobile phone, please
click Allow to obtain. In the "device" interface of the APP click
"Bind device" and then klick scan icon in upper right corner to
open QR scanner and scan QR code in the watch's settings .
During pairing process the connection confirmation button will
pop up on the watch. Please click "allow pairing"
Manual connection
After open phone's Bluetooth and GPS location (android
phones) , open Fitcloud Pro and click "Bind device", then
"search" icon on the bottom of the screen. When You find your
watch FW63 click "connect" next to its name. . During pairing
process the connection confirmation button will pop up on the
watch. Please click "allow pairing"
When You finish the above operations, slide down on the
watch face, you will see the color change of the BT icon and
status of connection is below:
"BT Disconnection
In APP click "device" interface, then watch's icon on screen's
top and "unbind" > OK to ubbind FW63.
In iOS click "Ignore device" "
2