Verify Successful Installation - Trellix NS Series Product Manual

8 | NS3x00 Sensors
Note
This value is used to establish a trust relationship between the Sensor and the Manager. The secret key value can be
between 8 and 25 characters of any ASCII text. The shared key value is case-sensitive. Make sure the value matches the
shared secret key value you provided in the Manager interface while adding the Sensor.
11. Type to verify the configuration information. Check that all information is correct.
show
12. Type to exit the session.
exit
:

Verify successful installation

Steps:
1. Type in the Sensor CLI.The status report appears.
status
The Sensor parameter
.
yes
2. Return to the Manager. In the Manager Home page, view the Manager status in the System Faults section.The Manager
status should be up and Sensor status should be active.
304
should be
System Initialized
, and for Manager communication
yes
Trellix Intrusion Prevention System NS-series Sensor Product Guide
should be
Trust Established