Configure Sensor Information - Trellix NS Series Product Manual

8 | NS3x00 Sensors
5. Click Save.
The added Sensor is displayed on the Sensors tab of Device Manager page.
:

Configure Sensor information

Configure the Sensor with the network information, a name, and the shared secret key that the Sensor uses to establish secure
communication with the Manager. Use the name and key values you set in Add the Sensor to the Manager section.
Tip
You must have physical access to the Sensor when you configure a Sensor for the first time.
At any time during configuration, you can type a question mark (
list of all commands.
Steps:
1. Log on to the Sensor using the terminal connected to the Console port.
2. At the prompt, log on using the default Sensor username
3. (Optional, but recommended) Change the Sensor password. At the prompt, type
the new password and asks you for the old password.
Note
A password must contain between 8 to 25 characters, is case-sensitive, and can consist of any alphanumeric character
or symbol.
302
) to get help on the Sensor CLI commands. Type
?
and password
(admin) (admin123)
passwd
Trellix Intrusion Prevention System NS-series Sensor Product Guide
commands
.
. The Sensor prompts you to enter
for a