Unpack The Sensor; Setting Up The Sensor; Setup Overview; How To Position The Sensor - Trellix NS Series Product Manual

6 | NS5x00 Sensors
•
Power supply (x2)
•
Power cords (Trellix provides a standard and international power cables)
•
Set of rack mounting rails
•
Printed Quick Start Guide
:

Unpack the Sensor

Steps:
1. Open the crate.
2. Remove the first accessory box.
3. Verify you have received all parts.These parts are listed on the packing list and in the Contents of the box section.
4. Place the Sensor box as close to the installation site as possible.
5. Position the box with the text upright.
6. Open the top flaps of the box.
7. Remove the accessory box within the Sensor box.
8. Verify you have received all parts.These parts are listed on the packing list and in the Contents of the box section.
9. Remove the Slide Rail Kit.
10. Pull out the packing material surrounding the Sensor.
11. Remove the Sensor from the antistatic bag.
12. Save the box and packing materials for later use in case you need to move or ship the Sensor.
:

Setting up the Sensor

This chapter describes how to set up the Sensor for you to configure it.
:

Setup overview

Setting up a Sensor involves these steps:
1. Position the Sensor as described in the section
2. Attach power, network, and monitoring cables.
3. Turn on the Sensor.
4. Configure the Sensor after you have set up and turned it on.
:

How to position the Sensor

240
How to position the Sensor.
Trellix Intrusion Prevention System NS-series Sensor Product Guide