External Controls; Regulations And Safety Notices - Acer KA2 Series User Manual

External controls

1 Power button
Function key
2
/
Function key
3
/
Function key
4
X
/
Function key
5
/

Regulations and safety notices

FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful Interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful
interference to radio or television reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other
relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive
2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign
requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with
EMC regulations.
Turns the monitor on/off. Blue indicates power on. Amber indicates standby/power
saving mode.
a. Press to view Main page. Press again to enter hotkey 1 function.
b. When the Function Menu is active, press this key to view the basic information for your
monitor and curre nt input or reset the custom color settings to the factory defaults.
a. Press to view Main page. Press again to enter hotkey 2 function.
b. When the Function Menu is active, press this button to select select scenario mode
or game mode.
a. Press to view Main page. Press again to enter Input select function.
b. When the Function Menu is active, this button will quit the OSD.
a. Press to view Main page. Press again to enter next function in the Function Menu.
b. The single toggle button on the backside of the Display bezel operates like a joystick.
To move the cursor, simply toggle the button in four directions. Press the button to
select desired option. Bright gray indicates operable. Dark gray indicates inoperable.
1
2
3
4
5