Subscribe to Our Youtube Channel
Related Manuals for NEFF D86D35N0GB
Summary of Contents for NEFF D86D35N0GB
- Page 1 Installation instructions and how to use and look after your built-in cooker hoods D96M5 / D99M5 NEFF (UK) Ltd...
- Page 2 Fig. 1 Abb. 1 ELECTRO mind. mind. mind. mind.
-
Page 3: Appliance Description
Filter grille switches interlocking, etc. If the air intake is inadequate, there is a risk of poisoning from combustion gases which are drawn back into the room. An air-intake/exhaust-air wall box by itself is no guarantee that the limiting value will not be exceeded. -
Page 4: Before Using For The First Time
Use carefully. They contain important you may find descriptions of individual information concerning your personal features that do not apply to your safety as well as on use and care of the specific appliance. appliance. This extractor hood complies with all Please retain the operating and relevant safety regulations. -
Page 5: Operating Procedure
Press the + button. appropriate intervals, the possibility of them The fan speed is increased by one step. catching fire as a result of a build-up of heat Press the – button. such as occurs when deep-fat frying or The fan speed is reduced by one step. - Page 6 Warning: The halogen bulbs must be switched off and cool. 1. Remove the metal filters. 2. Press in the lug at the front and remove the activated carbon filter. 2. Clean the filters. 3. Insert the clean filters back into the hood.
-
Page 7: Cleaning And Care
1. Switch off the extractor hood and pull electricity supply by pulling out the out the mains plug or switch off the mains plug or switching it off at the fuse electricity supply at the fuse box. box. When switched on, the halogen bulbs At the same time as you clean the become very hot. -
Page 9: Installation Instructions
Only one side of the extractor hood Please ask your dealer or inquire at your may be installed next to a high-sided unit local authority about current means of or high wall. Gap at least 50 mm. -
Page 10: Prior To Installation
flue that is interlocking, etc. currently used for other purposes, nor into a shaft that is used for ventilating rooms in If the air intake is inadequate, there is a which stoves or fireplaces are also located. -
Page 11: Circulating-Air Mode
Short, smooth air exhaust pipe. Mount the pipe directly onto the air As few bends in the pipe as possible. outlet on the hood. Diameter of pipe to be as large as possible and no tight bends in pipe. -
Page 12: Electrical Connection
A separator must be installed in the house- hold circuit. A suitable separator is a switch that has a contact gap of more than 3 mm and interrupts all poles. Such devices include circuit breakers and contactors. -
Page 13: Installation
4. Drill 4 x l 8 mm holes for the extractor hood and 2 x l 8 mm holes for the chimney panelling. Insert plugs into the holes so that they are flush with the wall. - Page 14 07. Screw in lower screws (hex screws). 11. Remove the protective film from the two flue ducts. 08. Stick protective film over the holes of the 2 lower mounting bolts in the Take care not to damage the protective grid.
- Page 15 Accessories: Z 5116X5 360732...
- Page 16 NEFF (UK) Ltd. Grand Union House, Old Wolverton Road, Old Wolverton Milton Keynes, MK12 5PT Tel: 01908 328300 5750 208 309 Fax: 01908 328399 Printed in Germany 0604 Es.
Need help?
Do you have a question about the D86D35N0GB and is the answer not in the manual?
Questions and answers