NEFF D8985N0GB How To Use Manual
  1. Manuals
  2. Brands
  3. NEFF Manuals
  4. Ventilation Hood
  5. D8985N0GB
  6. How to use manual
NEFF D8985N0GB How To Use Manual

NEFF D8985N0GB How To Use Manual

How to use and look after your built-in cooker hoods
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
How to use and look after your
built-in cooker hoods
D8985
NEFF (UK) Ltd

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D8985N0GB and is the answer not in the manual?

Questions and answers

Related Manuals for NEFF D8985N0GB

Summary of Contents for NEFF D8985N0GB

  • Page 1 How to use and look after your built-in cooker hoods D8985 NEFF (UK) Ltd...
  • Page 2 Fig. 1 Abb. 1 ELECTR. mind. mind.

  • Page 3: Appliance Description

    Light / fan switches If the air intake is inadequate, there is a risk of poisoning from combustion gases which are drawn back into the room. An air-intake/exhaust-air wall box by itself is no guarantee that the limiting value will not be exceeded.

  • Page 4: Before Using For The First Time

    flames could cause damage to the from overloading. extractor hood. Never operate the extractor hood without a grease filter. Overheated fat or oil can easily catch fire. If you are cooking with fat or oil, e.g. chips, etc., never leave the cooker unattended.

  • Page 5: Operating Procedure

    finishing cooking. The fans in this appliance can be switched to the desired setting by hand (manual mode) or can be controlled fully automatically with the automatic function according to your requirements (automatic mode).
  • Page 6 – Intensive setting: 1. To switch on the intensive setting ç press the button. The fan runs for 5 minutes at Setting then switches off for 55 minutes. This process is repeated every hour. Switching off: Press the button. Automatic mode has been switched off.
  • Page 7 Switching on: Press the button. Simultaneously press the buttons. Light The light can be used at any time, even when the appliance has been switched After approx. 3 seconds the light off. switches on to acknowledge the setting. Switching on/off:...

  • Page 8: Filters And Maintenance

    Important: By cleaning the metal grease filters at appropriate intervals, the possibility of them catching fire as a result of a build-up of heat such as occurs when deep-fat frying or roasting is taking place, is reduced. Saturation indicator: When the grease filters reach saturation...
  • Page 9 1. Remove the metal filters 1. Remove the metal filters. (see "Removing and inserting the metal 2. Press the catches at both sides of the grease filters"). filter inwards and lift the carbon filter 2. Insert the activated carbon filter.

  • Page 10: Cleaning And Care

    1. Switch off the extractor hood and pull electricity supply by pulling out the out the mains plug or switch off the mains plug or switching it off at the fuse electricity supply at the fuse box. box. When switched on, the halogen bulbs At the same time as you clean the become very hot.

  • Page 11: If You Encounter A Problem

    Instructions). Disconnect the extractor hood from the mains electricity supply by pulling out the plug or switching it off at the main fuse box. Wait for approx. 1 minute and then switch it on again. If you have any questions or if a fault occurs, please call Customer Service.

  • Page 12: Installation Instructions

    Old appliances are not worthless above gas cooking devices, at a rubbish. If they are disposed of in an minimum height of 650 mm – Fig. 1 – is environment-friendly manner, valuable raw permitted provided that the following materials can be recovered for use again.

  • Page 13: Prior To Installation

    flue that is interlocking, etc. currently used for other purposes, nor into a shaft that is used for ventilating rooms in If the air intake is inadequate, there is a which stoves or fireplaces are also located.
  • Page 14 Short, smooth air exhaust pipe. Mount the pipe directly onto the air As few bends in the pipe as possible. outlet on the hood. Diameter of pipe to be as large as possible and no tight bends in pipe.

  • Page 15: Electrical Connection

    The wall must be flat and perpendicular. IMPORTANT: Fitting a Different Plug: Ensure that the wall is capable of The wires in the mains lead are coloured in providing a firm hold for mounting accordance with the following code: screws and plugs.

  • Page 16: Installation

    650 mm for a gas hob. The bottom edge of the template equates to the lower edge of the extractor hood. 4. Drill 4 x l 8 mm holes for the extractor ca.5mm hood and 2 x l 8 mm holes for the chimney panelling.
  • Page 17 Installation 08. Screw in the two lower hexagon head 13. Push both sections of the flue panelling cap screws. together (slots in the upper section must be pointing downwards) and Before the 4 screws are tightened insert into the opening in the extractor down, align the extractor hood properly.
  • Page 18 Notes...
  • Page 19 Notes...
  • Page 20 Notes...
  • Page 21 Notes...
  • Page 22 Notes...
  • Page 23 Z5114X5 351210 Z5844X0 Z5841N0 Z5861N0 264765...
  • Page 24 NEFF (UK) Ltd. Grand Union House, Old Wolverton Road, Old Wolverton Milton Keynes, MK12 5PT Tel: 01908 328300 5750 205 663 Fax: 01908 328399 Printed in Germany 0703 Es.

This manual is also suitable for:

D8985

Table of Contents