Advertisement
Sensors: Z510-SW2T, Z510-SW6, and Z510-SW17
Sensor model
Measurement mode
Measurement distance at center
Measurement range
Light source
Beam dimensions (See note 1.)
Linearity
Resolution
Sampling period
LED indicator (Laser indicator)
Temperature characteristic
(See note 9.)
Degree of protec-
tion
Ambient operat-
ing illumination
Environmen-
Ambient tempera-
tal resistance
ture
Ambient humidity Operating and storage: 35% to 85% (with no condensation)
Vibration (de-
struction)
Materials
Cable length
Minimum bending radius
Weight
Note: 1. The minimum light intensity at the edges of the beam is defined as 1/e
scatter beyond this beam region and the measurement may be affected if the immediate vicinity around the workpiece is highly reflective.
2. This is the error with respect to the theoretical line of the displacement output when measuring the standard OMRON quartz glass. The
linearity may vary depending on the workpiece being used.
3. This is the error with respect to the theoretical line of the displacement output when measuring a standard OMRON stainless-steel block.
The linearity may vary depending on the workpiece being used.
4. This is the error with respect to the theoretical line of the displacement output when mea-
suring the standard OMRON white alumina ceramic. The linearity may vary depending on
the workpiece being used.
5. This is the displacement output's peak-to-peak displacement conversion value. These fig-
ures are for measurement of the standard OMRON quartz glass (mirror reflection) or stan-
dard OMRON stainless-steel block (diffuse reflection) at the center of the measurement
region. The resolution performance characteristics may not be met when operating in a
magnetic field.
6. These figures are for Sensors connected to a Z510-WC10E or Z510-WC15E and averaged over 16 measurements. The averaged data
was transmitted to a PC through an RS-232C connection for storage and processing.
7. This is the displacement output's peak-to-peak displacement conversion value. (These figures are for measurement of the standard OM-
RON white alumina ceramic at the center of the measurement region.)
The resolution performance characteristics may not be met when operating in a strong magnetic field.
8. These figures are for Sensors connected to a Z510-WC10E or Z510-WC15E and averaged over 64 measurements. The averaged data
was transmitted to a PC through an RS-232C connection for storage and calculations.
9. This is the value measured when the gap between the Sensor and workpiece (white alumina ceramic) is fixed with an aluminum jig.
Z510
Z510-SW2T
Mirror reflection Diffuse
reflection
5.2 mm
20 mm (16 mm with
beam cover mount-
ed)
±0.8 mm
Visible semiconductor laser
(Wavelength: 670 nm, 15 mW
max., class 3B)
20 µm × 4 mm typical at the ref-
erence distance
(2-mm measurement region)
±0.1% F.S.
±0.1% F.S.
(See note 2.)
(See note 3.)
0.25 µm (See notes 5 and 6.)
9.94 ms
Lit when the laser is ON.
0.01% F.S./° C
IP64
Illumination at light-receiver surface: 3,000 lx max. (incandescent light)
Operating: 0 to 50° C (with no icing or condensation)
Storage: -15 to 60° C (with no icing or condensation)
10 to 150 Hz (double amplitude of 0.35 mm) for 8 minutes each in the X, Y, and Z directions
Controller: Die-cast aluminum
Cable sheathing: Heat-resistant PVC
Connector: Zinc alloy and brass
0.5 m
68 mm
Approx. 350 g
Z510-SW6
Diffuse
Mirror reflection Diffuse
reflection
50 mm
44 mm
±5 mm
±4 mm
Visible semiconductor laser
(Wavelength: 658 nm, 15 mW max., class 3B)
30 µm × 24 mm typical at the ref-
erence distance
(6-mm measurement region)
±0.1% F.S. (See note 4.)
0.3 µm (See notes 7 and 8.)
IP66
Approx. 600 g
2
(13.5%) of the intensity at the center of the beam. Some light will
Z510-SW17
120 mm
80 mm
Z510-SW17
Mirror reflection
reflection
100 mm
94 mm
±20 mm
±16 mm
60 µm × 45 mm typical at the ref-
erence distance
(17-mm measurement region)
1 µm (See notes 7 and 8.)
±0.1% max.
Distance
80 mm
120 mm
B-55
Advertisement
