Omron NS-RUNTIME - SOFTWARE 2007 User Manual page 98

5-6 Initialization/Setting Screen
The following items will be displayed in the Initialization/Setting Screen
Tab Name
Initialize
PT Settings
Project
Password
Comm.
5-14
Item
Remove
Alarm/Event History
Initialize/Save
Data Log
Initialize/Save
Operation Log
Initialize/Save
Error Log
Initialize/Save
Internal Holding
Memory ($HB/$HW)
Initialize
Screen Saver
Key Press Sound
Buzzer Sound
Backlight
Calendar Check
Project Title
No. of Labels
Initial Screen
Initial label
Alarm/Event Rec.
Method
Data Log Rec. Method
Oper. Log Rec. Method
Error Log Rec. Method
System Memory
Password
Comm. Auto-return
Time-out Interval
Retry Counts
Serial A
Serial B
Ethernet
Controller Link
Function
Removes the drive specified as the save destination of
history data.
Initializes and saves alarm/event history data.
Initializes and saves the data log.
Initializes and saves the operation log.
Initializes and saves the error log.
Initializes and saves the Internal Holding Memory
($HB/$HW).
Sets whether to use the screen saver.
Sets whether an input sound is heard when the touch
switches are clicked.
Sets whether to sound a buzzer when a command
from the host is received or an error occurs.
Sets the backlight brightness when using the NSA
Series.
(Settings cannot be made when the NS-Runtime is
used in an environment other than the NSA Series.)
Sets and displays the date and the time of the
system clock.
Displays the project title.
Displays the number of labels set for the project.
Sets and displays the screen numbers first
displayed after the NS-Runtime is started.
Sets and displays the label number shown on the
screen after the NS-Runtime is started.
Displays the method for recording the alarm/event
histories.
Displays the method for recording the data log.
Displays the method for recording the operation log.
Displays the method for recording the error log.
Displays the allocated hosts and addresses of the system
memory ($SB/$SW).
Changes a password.
Selects whether automatic recovery is used when a
communications error occurs.
Sets and displays the timeout monitor time.
Sets and displays the number of communications
retries.
Sets and displays whether serial port A is used, the
communications method and other details.
Sets and displays whether serial port B is used, the
communications method, and other details.
Sets and displays whether Ethernet is used and
communications details.
Sets and displays whether Controller Link is used and
communications details.