Exit; End Ns-Runtime; Shut Down - Omron NS-RUNTIME - SOFTWARE 2007 User Manual

5-10 Exit

5-10 Exit

This function is used to execute the end processing.

End NS-Runtime

Shut down

This section describes how to use these functions.
5-10-1 End NS-Runtime
This function is used to end the NS-Runtime.
End the NS-Runtime by using the following procedure from the System Menu.
1. Click the Go Button next to the End the NS-Runtime. The following message confirming
the end will appear.
2. Click the Yes Button to end the NS-Runtime. Click the No Button to cancel the end
function.
N o t e
N o t e
N o t
The NS-Runtime can also be shut down by turning On the $SB63 in the system memory.
5-10-2 Shut Down
This function is used to end the NS-Runtime and shut down Windows.
End the system by using operations from the System Menu as follows.
1. Click the Go Button next to the Shut down. The following message confirming the end will
appear.
2. If the Yes Button is clicked the NS-Runtime will end and then Windows will shut down. If
the No Button is clicked both the NS-Runtime and Windows will not end.
5-48
Item
e
Ends the NS-Runtime.
Ends the NS-Runtime and shuts down Windows.
Function