System Memory; System Bit Memory ($Sb) - Omron NS Programming Manual

Section 2 NS Series Functions
NS Series Programming Manual

2-4 System Memory

System memory is used for exchanging information between the host and the PT, such as for control-
ling the PT and notifying the host of PT status.
The system memory is divided into bit and word sections.
2-4-1

System Bit Memory ($SB)

System bit memory is used to exchange information between the host and the PT, such as for control-
ling the PT and notifying the host of PT status, in bit units.
The system bit memory contains 64 bits with predefined functions.
The system bit memory is listed in the following table.
Address Classification
$SB0 Notification
$SB1 Notification
$SB2 Notification
$SB3 Control
$SB4 Notification
$SB5 Notification
$SB6 Control
$SB7 Control
$SB8 Control
$SB9 Control
$SB10 Control
$SB11 Notification
$SB12 Control
$SB13 Control
$SB14 Control
$SB15 Notification/control
$SB16 Control
$SB17 Control
$SB18 Control
$SB19 Control
$SB20 Control
$SB21 Control
$SB22 Control
$SB23 Control
$SB24 Notification/control
$SB25
Control
$SB26 Control
$SB27 Control
$SB28 Control
$SB29 Control
$SB30 Notification
$SB31
Notification
$SB32 Notification/control
$SB33 Notification/control
$SB34 Notification/control
$SB35 Notification/control
$SB36 Notification/control
$SB37 Notification/control
$SB38 Notification/control
$SB39 Control
$SB40 Control
$SB41 Control
RUN Signal (Pulse)
RUN Signal (Always ON)
Screen Switch Strobe
Prohibit Shifting to System Menu
Battery Low
Data Input Detector
Brightness Adjust, High
Brightness adjust, middle
Brightness adjust, low
Backlight Control (Screen Saver Start/Cancel)
Control Backlight Flashing
Backlight Status
Continuous Buzzer
Short Intermittent Buzzer
Long Intermittent Buzzer
Notification/control of Video
Processing Priority Registration for Port A (NT Link 1:N)
Processing Priority Registration for Port B (NT Link 1:N)
Display Keypad with Temporary Input
Prohibit Input
Contrast Adjustment (+10 levels) (NS5 only)
Contrast Adjustment (+1 level) (NS5 only)
Contrast Adjustment (−1 level) (NS5 only)
Contrast Adjustment (−10 levels) (NS5 only)
Video Capture
Start Printing/Capture Screen (Not supported by NS5-@Q0@.)
Stop Printing
Test Pattern Printing
Printer head-cleaning (Ignored for PictBridge.)
Update Printer Status
Printer Busy Status/Capture Busy Status
Notification of Print Error/Capture Screen Error
Initialize Alarm/Event History
Save Alarm/Event History
Internal Holding Memory ($HB/$HW) Initialization
Initialize Data Log
Save Data Log
Initialize Operation Log
Save Operation Log
Log Functional Object Operation
Log Switch Screen Operation
Log Macro Operation
2-19
Function
2-4 System Memory