Omron NS-CXDC1-V3 - 12-2009 User Manual page 29

Basic Operation Procedures
Debugging Newly Created
Screen Data while
Integrated with a Virtual or
Actual PLC (CX-Designer
Version 2.0 or Later)
Also set the properties for that functional object.
Save Screen.
Select File - Save Screen/Sheet.
Save Project.
Select File - Save All.
Print data as required. Select File - Print.
Check operation using the screen data on the
CX-Designer if required.
Select Tools - Test.
When using integration simulation with an actual PLC:
Connect the personal computer to the actual PLC.
Start the Test Tool.
Select Tool - Test.
Connect to the virtual PLC (CX-Simulator) or to the actual PLC.
Select Connect to CX-Simulator or Connect to PLC, and then click the
Start Button.
Run the user program and execute the integrated simulation with the
PLC. Run the virtual PLC (CX-Simulator) or the actual PLC user program
to debug the PT and the entire PLC System.
or
In personal
computer
Virtual PT
Virtual PLC
In personal
computer
Virtual PT
Actual PLC
External devices
Section 1-2
7