Function Icons - Omron DeviceNet Safety NE1A-HDY01 Operation Manual

Screen Names and Functions
2-1-2

Function Icons

Icon Function name
Monitor
Device Status
Change Target
Error History
Upload
Device Property
Download
Replace Device
Change Mode
Lock
Unlock
Reset
Displays the connected device's I/O terminal status. Errors
occurring at the connected device will be displayed on the Main-
tenance Tab Page.
Displays the device status as well as details of alarms and warn-
ings. Errors occurring at the connected device will be displayed
on the Maintenance Tab Page.
This function is used to change the connected device.
Displays the error history of the connected device. Errors occur-
ring at the connected device will be displayed on the Mainte-
nance Tab Page.
Uploads parameters from the connected device and saves them
to the Memory Card.
Displays the properties of the connected device.
Device parameters copied to the Memory Card are downloaded
to the connected device.
Device parameters uploaded from the connected device are
downloaded after replacing the device.
This function cannot be used if a system error occurs due to a
fatal hardware error in the device that is being replaced.
Changes the operating mode of the connected device.
Locks or unlocks the connected device.
Resets the connected device.
Description
Section 2-1
Reference
3-2-2
3-2-3
3-1-3
3-2-4
3-4
3-2-5
3-5
3-3
3-7
3-8
3-6
27