Downloading Parameters; Creating Device Parameter Files; Downloading The File - Omron DeviceNet Safety NE1A-HDY01 Operation Manual

Downloading Parameters

3-5

Downloading Parameters

3-5-1

Creating Device Parameter Files

1,2,3...
IMPORTANT The device parameter file (*dvf) used by the Mobile Console is created from a
3-5-2

Downloading the File

1,2,3...
54
Parameter information saved in the Memory Card can be downloaded to the
device that is connected online.
The device parameter files downloaded from the Mobile Console to a device
(*.dvf) are created on the Network Configurator.
1. Start the Network Configurator and open the network configuration file.
(*.ncf).
2. Confirm that the configuration for the device to which the parameter will be
downloaded has been verified or locked (an S mark or locked mark will be
displayed).
network configuration file (*.ncf) that has been verified or locked. The system
may not operate properly if the file is not verified or locked.
3. Select the device and then select Device - Parameters - Save from the
menu bar.
4. A device parameter file will be created in the specified folder.
Use the following procedure to download the device parameter file (*.dvf) from
the Mobile Console to a device.
1. Save the device parameter file on a Memory Card and set the Memory
Card in the Mobile Console.
2. Tap the Download Icon in the Main Window (2/4).
Section 3-5