Using The Battery Pack; Replacing The Battery Pack - Omron DeviceNet Safety NE1A-HDY01 Operation Manual

Using the Battery Pack

1-7

Using the Battery Pack

IMPORTANT Make sure that the power switch is turned OFF before you install or replace
1-7-1

Replacing the Battery Pack

1,2,3...
The RB-B2001A Battery Pack must be used.
the battery pack.
1. Turn OFF the power switch.
2. Slide the lock lever on the back in the direction indicated by the arrow to
unlock the battery cover.
3. Lightly press the grip section of the battery cover and slide it in the direction
indicated by the arrow to remove it.
(1)
(2)
4. Pull out the battery stopper.
5. Slide the battery pack in the direction indicated by the arrow to remove it.
Battery stopper
Section 1-7
Lock lever
15