Connect With Bias Pedal App - Positive Grid BIAS MODULATION TWIN Product Manual

Connect with BIAS Pedal app

BIAS Modulation Twin comes with a
license for BIAS Pedal - Modulation Pack
(desktop software). You can redeem the
software code on our store page (see the
Redeem & Activate My Software section
of this manual). In addition to BIAS Pedal
(desktop), there's also a mobile version of
BIAS Pedal for iPad (sold separately).
To connect with the BIAS Pedal desktop software, simply connect BIAS Modulation Twin to your
computer using the supplied Micro USB cable and launch the BIAS Pedal software. BIAS Modula-
tion Twin will automatically connect with the BIAS Pedal software and initiate Remote Mode (see the
Remote Mode section of this manual).
*Note: If BIAS Pedal mobile is unable to detect your BIAS Modulation Twin, please check that the wireless function is turned on and
reconnect again. Also try bringing your mobile device closer to the pedal.
7
To connect with BIAS Pedal mobile, turn on the
Wireless function on BIAS Modulation Twin by
engaging the Wireless button on the rear panel. The
LED will start to blink, indicating that the pedal is
now in pairing mode and ready for connection.
Then launch BIAS Pedal mobile, go to Settings =>
Connect. BIAS Pedal mobile will begin searching for
an active BIAS Modulation Twin nearby and connect
with the pedal automatically.
8