Connect With Bias Pedal App - Positive Grid BIAS MODULATION Product Manual

Connect with BIAS Pedal app

BIAS Modulation comes with a license for
BIAS Pedal - Modulation Pack (desktop
software). You can redeem the software
code on our store page (see the Redeem
& Activate My Software section of this
manual). In addition to BIAS Pedal
(desktop), there's also a mobile version of
BIAS Pedal for iPad (sold separately).
To connect with the BIAS Pedal desktop software, simply connect BIAS Modulation to your computer
using the supplied Micro USB cable and launch the BIAS Pedal software. BIAS Modulation will
automatically connect with the BIAS Pedal software and initiate
Mode section of this manual).
*Note: If BIAS Pedal mobile is unable to detect your BIAS Modulation pedal, please check that the wireless function is turned on and
reconnect again. Also try bringing your mobile device closer to the pedal.
7
(see the Remote
Remote Mode
To connect with BIAS Pedal mobile, turn on the
Wireless function on BIAS Modulation by engaging
the Wireless button on the rear panel. The LED will
start to blink, indicating that the pedal is now in
pairing mode and ready for connection.
Next, launch BIAS Pedal mobile. Go to Settings =>
Connect. BIAS Pedal mobile will begin searching for
an active BIAS Modulation pedal nearby and
connect with the pedal automatically once it finds it.
8