Hot Air Frying - HOMCOM AF-D5509AS Manual

Hot air frying

1. Connect the mains plug into an earthed wall socket.
2. Carefully pull the pot out of the Hot-air fryer. (Fig.4)
3. Place the shelf in the pot.(Fig.5).
4. Put the food in the pot of the shelf. (Fig.6)
4. Slide the pot back into the Hot-air fryer (Fig 7)
Noting to carefully align with the guides in the body of the fryer.
Caution: Do not touch the pot during and some time after use, as it gets very hot.
Only hold the pot by the handle.
Fig.4
5. Determine the required preparation time for the ingredient ( see section 'Settings'
in this chapter).
6.Some ingredients require shaking halfway through the preparation time (see
section "Settings" in this chapter). To shake the ingredients, pull the pot out of the
appliance by the handle and shake it. Then slide the pot back into the air fryer
7. When you hear the buzzer, the set preparation time has elapsed. Pull the pot out of
the appliance
Note: Long press the power button for 2 seconds, then you can switch off the
appliance manually.
Tip: You can adjust temperature or time according to your taste during use.
8. Check if the ingredients are ready.
If the ingredients are not ready yet, simply slide the pot back into the appliance and
set the timer to a few extra minutes.
9. To remove ingredients (e.g. fries), pull the pot out of the Hot-air fryer and place it on
trial framework.
Fig.6
Fig.5
Fig.7
6